Planetary Centrifugal Mixer
"THINKY Solder Paste Mixer" SR-500
Special purpose machine
that can optimize temperature
and viscosity preparations
and dispersion and deaeration
of solder paste at the same time
FeaturesCan prepare uniform viscosity in a short time for solder paste just taken from cold storage without bringing it back to room temperature. Metal particles with high specific gravity such as solder particles settle to the bottom of containers in cold storage and cause differences in material viscosity. The SR-500 regulates the viscosity of solder paste in a short time, with uniform viscosity from top to bottom. Also, because it can remove air bubbles thought to cause spattering of solder balls, it contributes to reducing the defect rate.
- ・Can immediately prepare cold stored solder paste without bringing it back to room temperature
- ・By optimizing the mixing recipe, viscosity preparation and temperature preparation for solder paste is easy.
- ・Removes large air bubbles in the paste, which are considered the cause of solder paste defects.
- ・Handles commercial 500g solder paste containers as is
- ・Restirs and redisperses solder paste that has been used
- ・Supports solder paste in syringes by using the optional adapter
Solder Paste Mixer
Material Processing Examples
Solder Paste (solder powder and flux)
Thinky has over 60 different adapters and containers. To fulfill customer needs, we rovide the best adapters and mixing recipe for specific needs, such as cooling adapters, heat esistant adapters, etc...
If there are no adapters/containers to satisfy your needs, we also design custom-made containers and adapters.
Vacuum Syringe Charger ARC-40H
ARC-40H is developed for the purpose of easy, quick and bubble free charging materials after mixed, defoamed and dispersed by THINKY MIXER. Small syringes such as 3 ml, 5 ml and 10 ml can be used. The simple configuration allows for easy cleaning.
Unit Dimensions/Unit Weight
150 ml resin container
AC 120 V ± 10 %, 50/60 Hz
Approx. 50 VA (standby)
Max 900 VA (operation)
Instruction Manual × 1,
AC cable (including 3P adapter) × 1,
150 ml container × 3,
Adapter for HDPE 150 ml container × 1(including 1 O-ring)
Silicon rubber sheet × 1,
O-ring for fine adjustment × 1
1 metal fitting is attached to the unit rear to release the lid lock, in case of power failure.
- ＊1：Total mass to mount on the cup holder, including materials, containers, and adapters.
- ＊2：Contact us because the actual volume of mixing may vary depending on the containers, materials, and conditions.
Planetary Centrifugal Vacuum Mixer